I have an issue with the TV Pack 2008. I am able to receive some of channels (DVB-T muxes) from two transmitters, one close with good signal quality and the other far away with useless quality. It seems that media center scans the channels starting from the low frequencies, and in my case the useless channels get chosen as they are detected first due to having lower frequency. Prior the update I had both instances visible in the channels list, and was able to select the good ones. Now there is only single instance of each channel shown in the list. Is there a way to aid, or force, the media center to choose the desired mux instead of the one that gets detected first? Getting a more directional aerial could help but a SW solution would be preferred!